Double-storey extensions in Thamesmead

Covering Thamesmead

Our coverage around Thamesmead (SE2, SE28) also includes Barking (3 miles to the north-west) and Welling.

Homes in London

London projects often mean working on period terraces with neighbours on both sides, tight access through the house and conservation area controls, so careful planning and party wall work matter as much as the build.

What goes into a double-storey extension?

A double-storey extension adds new rooms on both the ground and first floor in one build, typically a larger kitchen or living space downstairs and an extra bedroom or bathroom above. Because the roof and foundations are shared, the cost per square metre is usually lower than a single-storey extension.

Structural engineer’s design and calculations
Windows, insulation, plastering, electrics and plumbing
Joining the new first floor to the existing landing

How much should I budget for a double-storey extension?

What double-storey extensions typically cost. These are guide ranges; the written quote for your house replaces them.

Double-storey extensions	Guide price incl. VAT
Standard specification	£2,400 to £2,900 per m²
Good specification	£2,900 to £3,400 per m²
High specification	£3,400 to £3,850 per m²

Planning and building rules in Thamesmead

Projects in England go through two separate checks. Planning (or confirmation that the work is permitted development) comes from the district, borough or unitary council, and building regulations approval comes from the council’s building control team or a registered building control approver. Where work touches a shared wall or digs near a neighbour’s foundations, the Party Wall etc. Act 1996 applies.

Two-storey rear extensions can sometimes be permitted development in England (no more than 3 m deep, at least 7 m from the rear boundary, roof pitch to match), but most two-storey and all two-storey side extensions need householder planning permission.

What should Thamesmead homeowners check first?

Side extensions close to a boundary are often set back or stepped down so they do not create a terraced effect.
The first-floor link can mean moving a bathroom or reshaping the landing.

What happens after I enquire?

Start with a conversation. A short call or the online form is enough for us to understand what you want to build.
We visit and measure. A surveyor checks the house, the boundaries and the ground, and discusses what is realistic.
Price and paperwork. The design is priced line by line, and we submit the planning and building control applications.
Construction and completion. One site lead co-ordinates every trade through to the building control certificate.

Your questions answered

How much does a two-storey extension cost?

Typically about £2,400 to £3,850 per square metre of new floor area including VAT. A 40 m² extension across two floors is often around £100,000 to £150,000 depending on specification.

Is a two-storey extension better value than a single-storey one?

Per square metre, usually yes, because the foundations and roof serve two floors of space.

How do I get a price for double-storey extensions in Thamesmead?

Use the guide price tool for a ballpark figure, then book a visit for a fixed written price for the agreed specification.

Double-storey extensions near Thamesmead

Learn more about double-storey extensions, or see every project we cover in Thamesmead.