Hip-to-gable loft conversions · Bridgwater

Hip-to-gable loft conversions in Bridgwater

We take on hip-to-gable loft conversions in Bridgwater as a complete project: survey, drawings, planning or permitted development checks, building control and the construction itself.

Covering Bridgwater

Our coverage around Bridgwater (TA6) also includes Burnham-on-Sea (8 miles to the north) and Taunton.

Homes in the South West

In the South West, matching local stone, render or slate is often the main design question, and conservation areas and listed buildings are common in historic towns.

What is a hip-to-gable loft conversion?

Hipped roofs are common on 1930s semis and have little usable volume until the hip is squared off. We rebuild the gable in brick or block, extend the roof structure, form the rear dormer and finish the new floor, keeping the front roof slope looking as close to the original as possible.

  • Gable wall build in brick, block or render
  • Staircase, insulation, plastering and electrics
  • En-suite and fire-protected escape route

What will a hip-to-gable loft conversion cost?

Use these ranges to budget for hip-to-gable loft conversions; the survey turns them into a fixed price for the agreed specification.

Hip-to-gable loft conversionsGuide price incl. VAT
Hip-to-gable with rear dormer£60,000 to £80,000
Double hip-to-gable (detached house)£70,000 to £95,000

Planning and building rules in Bridgwater

In England we deal with the council’s planning team for permission or a lawful development certificate, with building control (the council or a registered building control approver) for inspections, and with neighbours under the Party Wall etc. Act 1996 where it applies.

In England many loft conversions are permitted development: the extra roof volume must stay within 40 m³ on a terraced house or 50 m³ on a semi or detached house, nothing can sit higher than the existing ridge, no dormer can face a road on the main elevation, and side windows must be obscure-glazed and non-opening below 1.7 m.

What can change the price or programme?

  • Hip-to-gable volume counts towards the permitted development allowance.
  • The new gable is usually rendered or built in matching brick.

What happens after I enquire?

  1. Send us the details. Give us a postcode, a rough idea of size and some photos, by phone, form or the guide price tool.
  2. Free site visit. We measure up, look at access, drains and the structure, and talk through options and budget.
  3. Design and fixed price. You get drawings and a written price for the agreed specification before anything is ordered.
  4. Construction and completion. One site lead co-ordinates every trade through to the building control certificate.

What people ask before starting

Does a hip-to-gable need planning permission?

In England it is often permitted development if the total extra volume stays within 50 m³ for a semi or detached house.

How long does it take?

About 9 to 13 weeks on site.

How do I get a price for hip-to-gable loft conversions in Bridgwater?

Use the guide price tool for a ballpark figure, then book a visit for a fixed written price for the agreed specification.

Other towns nearby

Learn more about hip-to-gable loft conversions, or see every project we cover in Bridgwater.

Planning an extension, loft or new home?

Get a guide price in two minutes, then book a free site visit.

CallGet a quote