Covering Christchurch
Our coverage around Christchurch (BH23) also includes Bournemouth (4 miles to the west) and New Milton.
Homes in the South West
Homes in the South West range from coastal and rural properties in stone and slate to city terraces and modern estates, so extensions are designed to match the local materials.
What does a hip-to-gable loft conversion involve?
Hipped roofs are common on 1930s semis and have little usable volume until the hip is squared off. We rebuild the gable in brick or block, extend the roof structure, form the rear dormer and finish the new floor, keeping the front roof slope looking as close to the original as possible.
- Extended ridge and roof structure
- Staircase, insulation, plastering and electrics
- En-suite and fire-protected escape route
How much should I budget for a hip-to-gable loft conversion?
Guide prices for hip-to-gable loft conversions, including VAT where it applies. Your fixed price is confirmed in writing after the survey.
| Hip-to-gable loft conversions | Guide price incl. VAT |
|---|---|
| Hip-to-gable with rear dormer | £60,000 to £80,000 |
| Double hip-to-gable (detached house) | £70,000 to £95,000 |
Do you need permission for a hip-to-gable loft conversion in Christchurch?
Projects in England go through two separate checks. Planning (or confirmation that the work is permitted development) comes from the district, borough or unitary council, and building regulations approval comes from the council’s building control team or a registered building control approver. Where work touches a shared wall or digs near a neighbour’s foundations, the Party Wall etc. Act 1996 applies.
In England many loft conversions are permitted development: the extra roof volume must stay within 40 m³ on a terraced house or 50 m³ on a semi or detached house, nothing can sit higher than the existing ridge, no dormer can face a road on the main elevation, and side windows must be obscure-glazed and non-opening below 1.7 m.
What can change the price or programme?
- Hip-to-gable volume counts towards the permitted development allowance.
- Scaffolding goes up on the side of the house, which may need a neighbour’s agreement.
How does the project run?
- Tell us about the project. Call, use the guide price tool or send the form with a few photos and a postcode.
- We visit and measure. A surveyor checks the house, the boundaries and the ground, and discusses what is realistic.
- Drawings, approvals, written quote. We prepare the design, apply for the approvals it needs, and give you a fixed price in writing.
- We build it. Work follows an agreed programme, with inspections at each stage and a final sign-off.
Questions about a hip-to-gable loft conversion in Christchurch
Does a hip-to-gable need planning permission?
In England it is often permitted development if the total extra volume stays within 50 m³ for a semi or detached house.
Will the roof tiles match?
We match the tiles as closely as possible, using reclaimed tiles where the originals are no longer made.
Who deals with the council for a project in Christchurch?
We do. We prepare the drawings, submit planning or permitted development paperwork if needed, and arrange building control inspections.
Hip-to-gable loft conversions in nearby towns
- Hip-to-gable loft conversions in Bournemouth
- Hip-to-gable loft conversions in New Milton
- Hip-to-gable loft conversions in Poole
- Hip-to-gable loft conversions in Wimborne Minster
Learn more about hip-to-gable loft conversions, or see every project we cover in Christchurch.