Covering Gloucester
We work in Gloucester (GL1) and the places around it, including Cheltenham, Stroud and Ledbury.
Homes in the South West
The South West mixes stone and render cottages, Victorian terraces in the larger towns and modern estates, and many historic centres are conservation areas where materials and roof shapes are closely controlled.
What does a hip-to-gable loft conversion involve?
Hipped roofs are common on 1930s semis and have little usable volume until the hip is squared off. We rebuild the gable in brick or block, extend the roof structure, form the rear dormer and finish the new floor, keeping the front roof slope looking as close to the original as possible.
- Volume calculation and planning check
- Extended ridge and roof structure
- Staircase, insulation, plastering and electrics
What will a hip-to-gable loft conversion cost?
Typical ranges for hip-to-gable loft conversions. Ground conditions, access and specification move the final figure, which we fix in writing before work starts.
| Hip-to-gable loft conversions | Guide price incl. VAT |
|---|---|
| Hip-to-gable with rear dormer | £60,000 to £80,000 |
| Double hip-to-gable (detached house) | £70,000 to £95,000 |
Planning and building rules in Gloucester
Projects in England go through two separate checks. Planning (or confirmation that the work is permitted development) comes from the district, borough or unitary council, and building regulations approval comes from the council’s building control team or a registered building control approver. Where work touches a shared wall or digs near a neighbour’s foundations, the Party Wall etc. Act 1996 applies.
In England many loft conversions are permitted development: the extra roof volume must stay within 40 m³ on a terraced house or 50 m³ on a semi or detached house, nothing can sit higher than the existing ridge, no dormer can face a road on the main elevation, and side windows must be obscure-glazed and non-opening below 1.7 m.
What can change the price or programme?
- Hip-to-gable volume counts towards the permitted development allowance.
- Scaffolding goes up on the side of the house, which may need a neighbour’s agreement.
From first call to completion
- Send us the details. Give us a postcode, a rough idea of size and some photos, by phone, form or the guide price tool.
- We visit and measure. A surveyor checks the house, the boundaries and the ground, and discusses what is realistic.
- Price and paperwork. The design is priced line by line, and we submit the planning and building control applications.
- Build and hand over. Our teams build to the programme, building control inspects, and you get the completion paperwork at the end.
Your questions answered
Does a hip-to-gable need planning permission?
In England it is often permitted development if the total extra volume stays within 50 m³ for a semi or detached house.
How long does it take?
About 9 to 13 weeks on site.
Who deals with the council for a project in Gloucester?
We do. We prepare the drawings, submit planning or permitted development paperwork if needed, and arrange building control inspections.
Hip-to-gable loft conversions near Gloucester
- Hip-to-gable loft conversions in Cheltenham
- Hip-to-gable loft conversions in Stroud
- Hip-to-gable loft conversions in Ledbury
- Hip-to-gable loft conversions in Ross-on-Wye
Learn more about hip-to-gable loft conversions, or see every project we cover in Gloucester.