Covering New Malden
We work in New Malden (KT3) and the places around it, including Surbiton, Morden and Wimbledon.
Homes in London
London projects often mean working on period terraces with neighbours on both sides, tight access through the house and conservation area controls, so careful planning and party wall work matter as much as the build.
What does a hip-to-gable loft conversion involve?
Hipped roofs are common on 1930s semis and have little usable volume until the hip is squared off. We rebuild the gable in brick or block, extend the roof structure, form the rear dormer and finish the new floor, keeping the front roof slope looking as close to the original as possible.
- Volume calculation and planning check
- Extended ridge and roof structure
- Staircase, insulation, plastering and electrics
How much should I budget for a hip-to-gable loft conversion?
Typical ranges for hip-to-gable loft conversions. Ground conditions, access and specification move the final figure, which we fix in writing before work starts.
| Hip-to-gable loft conversions | Guide price incl. VAT |
|---|---|
| Hip-to-gable with rear dormer | £60,000 to £80,000 |
| Double hip-to-gable (detached house) | £70,000 to £95,000 |
Planning and building rules in New Malden
Projects in England go through two separate checks. Planning (or confirmation that the work is permitted development) comes from the district, borough or unitary council, and building regulations approval comes from the council’s building control team or a registered building control approver. Where work touches a shared wall or digs near a neighbour’s foundations, the Party Wall etc. Act 1996 applies.
In England many loft conversions are permitted development: the extra roof volume must stay within 40 m³ on a terraced house or 50 m³ on a semi or detached house, nothing can sit higher than the existing ridge, no dormer can face a road on the main elevation, and side windows must be obscure-glazed and non-opening below 1.7 m. Houses in conservation areas, National Parks and National Landscapes cannot use these roof-extension rights, so dormers there need planning permission (a rooflight-only conversion can still be permitted development), and flats always need permission.
What can affect a hip-to-gable loft conversion?
- Matching old clay tiles can be difficult; reclaimed tiles are often used.
- Scaffolding goes up on the side of the house, which may need a neighbour’s agreement.
From first call to completion
- Send us the details. Give us a postcode, a rough idea of size and some photos, by phone, form or the guide price tool.
- Survey at your house. We look at the existing structure, services and access, and agree what the design needs to achieve.
- Design and fixed price. You get drawings and a written price for the agreed specification before anything is ordered.
- Build and hand over. Our teams build to the programme, building control inspects, and you get the completion paperwork at the end.
Questions about a hip-to-gable loft conversion in New Malden
Does a hip-to-gable need planning permission?
In England it is often permitted development if the total extra volume stays within 50 m³ for a semi or detached house.
How long does it take?
About 9 to 13 weeks on site.
Who deals with the council for a project in New Malden?
We do. We prepare the drawings, submit planning or permitted development paperwork if needed, and arrange building control inspections.
Other towns nearby
- Hip-to-gable loft conversions in Surbiton
- Hip-to-gable loft conversions in Morden
- Hip-to-gable loft conversions in Wimbledon
- Hip-to-gable loft conversions in Ewell
Learn more about hip-to-gable loft conversions, or see every project we cover in New Malden.