Covering Telford
We work in Telford (TF3, WV99) and the places around it, including Wellington, Bridgnorth and Shrewsbury.
Homes in the West Midlands
Red-brick terraces and inter-war semis make up much of the housing in the West Midlands, which suits rear extensions, dormer lofts and hip-to-gable conversions, with more modern estates on the edges of the towns.
What does a hip-to-gable loft conversion involve?
A hip-to-gable loft conversion rebuilds the sloping side (the hip) of a semi-detached or detached house roof as a vertical gable wall, extending the ridge and creating enough space for a staircase and rooms. It is usually combined with a rear dormer.
- Volume calculation and planning check
- Rear dormer and roof coverings to match
- Staircase, insulation, plastering and electrics
What will a hip-to-gable loft conversion cost?
Use these ranges to budget for hip-to-gable loft conversions; the survey turns them into a fixed price for the agreed specification.
| Hip-to-gable loft conversions | Guide price incl. VAT |
|---|---|
| Hip-to-gable with rear dormer | £60,000 to £80,000 |
| Double hip-to-gable (detached house) | £70,000 to £95,000 |
Planning and building rules in Telford
Projects in England go through two separate checks. Planning (or confirmation that the work is permitted development) comes from the district, borough or unitary council, and building regulations approval comes from the council’s building control team or a registered building control approver. Where work touches a shared wall or digs near a neighbour’s foundations, the Party Wall etc. Act 1996 applies.
In England many loft conversions are permitted development: the extra roof volume must stay within 40 m³ on a terraced house or 50 m³ on a semi or detached house, nothing can sit higher than the existing ridge, no dormer can face a road on the main elevation, and side windows must be obscure-glazed and non-opening below 1.7 m. Houses in conservation areas, National Parks and National Landscapes cannot use these roof-extension rights, so dormers there need planning permission (a rooflight-only conversion can still be permitted development), and flats always need permission.
What can affect a hip-to-gable loft conversion?
- Hip-to-gable volume counts towards the permitted development allowance.
- Matching old clay tiles can be difficult; reclaimed tiles are often used.
What happens after I enquire?
- Tell us about the project. Call, use the guide price tool or send the form with a few photos and a postcode.
- We visit and measure. A surveyor checks the house, the boundaries and the ground, and discusses what is realistic.
- Price and paperwork. The design is priced line by line, and we submit the planning and building control applications.
- Build and hand over. Our teams build to the programme, building control inspects, and you get the completion paperwork at the end.
What people ask before starting
Does a hip-to-gable need planning permission?
In England it is often permitted development if the total extra volume stays within 50 m³ for a semi or detached house.
Will the roof tiles match?
We match the tiles as closely as possible, using reclaimed tiles where the originals are no longer made.
Who deals with the council for a project in Telford?
We do. We prepare the drawings, submit planning or permitted development paperwork if needed, and arrange building control inspections.
Hip-to-gable loft conversions in nearby towns
- Hip-to-gable loft conversions in Wellington
- Hip-to-gable loft conversions in Bridgnorth
- Hip-to-gable loft conversions in Shrewsbury
- Hip-to-gable loft conversions in Wolverhampton
Learn more about hip-to-gable loft conversions, or see every project we cover in Telford.