Covering Thamesmead
Alongside Thamesmead, we also cover Barking, Welling (3 miles to the south) and Becontree.
Homes in London
London projects often mean working on period terraces with neighbours on both sides, tight access through the house and conservation area controls, so careful planning and party wall work matter as much as the build.
What goes into a hip-to-gable loft conversion?
Hipped roofs are common on 1930s semis and have little usable volume until the hip is squared off. We rebuild the gable in brick or block, extend the roof structure, form the rear dormer and finish the new floor, keeping the front roof slope looking as close to the original as possible.
- Volume calculation and planning check
- Extended ridge and roof structure
- Rear dormer and roof coverings to match
How much should I budget for a hip-to-gable loft conversion?
Indicative costs for hip-to-gable loft conversions. London and the South East usually sit towards the top of each range.
| Hip-to-gable loft conversions | Guide price incl. VAT |
|---|---|
| Hip-to-gable with rear dormer | £60,000 to £80,000 |
| Double hip-to-gable (detached house) | £70,000 to £95,000 |
Planning and building rules in Thamesmead
Projects in England go through two separate checks. Planning (or confirmation that the work is permitted development) comes from the district, borough or unitary council, and building regulations approval comes from the council’s building control team or a registered building control approver. Where work touches a shared wall or digs near a neighbour’s foundations, the Party Wall etc. Act 1996 applies.
In England many loft conversions are permitted development: the extra roof volume must stay within 40 m³ on a terraced house or 50 m³ on a semi or detached house, nothing can sit higher than the existing ridge, no dormer can face a road on the main elevation, and side windows must be obscure-glazed and non-opening below 1.7 m. Houses in conservation areas, National Parks and National Landscapes cannot use these roof-extension rights, so dormers there need planning permission (a rooflight-only conversion can still be permitted development), and flats always need permission.
What should I think about before starting?
- Hip-to-gable volume counts towards the permitted development allowance.
- Matching old clay tiles can be difficult; reclaimed tiles are often used.
What happens after I enquire?
- Tell us about the project. Call, use the guide price tool or send the form with a few photos and a postcode.
- Survey at your house. We look at the existing structure, services and access, and agree what the design needs to achieve.
- Drawings, approvals, written quote. We prepare the design, apply for the approvals it needs, and give you a fixed price in writing.
- Build and hand over. Our teams build to the programme, building control inspects, and you get the completion paperwork at the end.
Hip-to-gable loft conversions: common questions
Does a hip-to-gable need planning permission?
In England it is often permitted development if the total extra volume stays within 50 m³ for a semi or detached house.
Will the roof tiles match?
We match the tiles as closely as possible, using reclaimed tiles where the originals are no longer made.
How do I get a price for hip-to-gable loft conversions in Thamesmead?
Use the guide price tool for a ballpark figure, then book a visit for a fixed written price for the agreed specification.
Other towns nearby
- Hip-to-gable loft conversions in Barking
- Hip-to-gable loft conversions in Welling
- Hip-to-gable loft conversions in Becontree
- Hip-to-gable loft conversions in Dagenham
Learn more about hip-to-gable loft conversions, or see every project we cover in Thamesmead.