Side return extensions in Ryde

Covering Ryde

We work in Ryde (PO33) and the places around it, including Gosport, Sandown and Portsmouth.

Because the Isle of Wight covers a wide area, we confirm availability after the first call and include any travel costs in the written quote rather than adding them later.

Homes in the South East

The South East has a lot of 1930s and post-war semi-detached housing, well suited to rear extensions and hip-to-gable loft conversions, alongside period properties in conservation areas that need a more careful design.

What do you get with a side return extension?

A side return extension builds over the narrow passage that runs beside the back of many Victorian and Edwardian terraced houses, widening the kitchen or dining room by a metre or two. It is usually combined with a glazed or part-glazed roof so the deeper room still gets daylight.

Drainage and new gully positions
Underfloor heating ready screed if wanted
Plastering and making good to the old house

How much should I budget for a side return extension?

Typical ranges for side return extensions. Ground conditions, access and specification move the final figure, which we fix in writing before work starts.

Side return extensions	Guide price incl. VAT
Standard specification	£3,350 to £3,700 per m²
Good specification	£3,700 to £4,150 per m²
High specification	£4,150 to £4,550 per m²

Do you need permission for a side return extension in Ryde?

Projects in England go through two separate checks. Planning (or confirmation that the work is permitted development) comes from the district, borough or unitary council, and building regulations approval comes from the council’s building control team or a registered building control approver. Where work touches a shared wall or digs near a neighbour’s foundations, the Party Wall etc. Act 1996 applies.

In England a single-storey rear extension can often go ahead under permitted development: up to 3 m deep on an attached house or 4 m on a detached one, no higher than 4 m, with eaves no higher than 3 m within 2 m of a boundary. Deeper extensions, up to 6 m or 8 m, need prior approval from the council first.

What should Ryde homeowners check first?

Glazed roofs need careful detailing against the neighbour’s wall.
Many terraces sit in conservation areas, where side extensions need planning permission.

What are the steps?

Send us the details. Give us a postcode, a rough idea of size and some photos, by phone, form or the guide price tool.
We visit and measure. A surveyor checks the house, the boundaries and the ground, and discusses what is realistic.
Price and paperwork. The design is priced line by line, and we submit the planning and building control applications.
Construction and completion. One site lead co-ordinates every trade through to the building control certificate.

Questions about a side return extension in Ryde

How much does a side return extension cost?

Usually about £3,350 to £4,550 per square metre including VAT, which works out at around £35,000 to £55,000 for a typical side return before the kitchen.

Is a glazed roof too hot in summer?

Modern solar-control glass and a mix of glazed and solid roof keep it comfortable. We advise on the balance during design.

Who deals with the council for a project in Ryde?

We do. We prepare the drawings, submit planning or permitted development paperwork if needed, and arrange building control inspections.

Side return extensions in nearby towns

Learn more about side return extensions, or see every project we cover in Ryde.