Single-storey extensions in Beaconsfield

Covering Beaconsfield

Our coverage around Beaconsfield (HP9) also includes Amersham, High Wycombe and Maidenhead.

Homes in the South East

Many South East homes are inter-war or post-war semis and detached houses with room for rear and side extensions, while historic town centres and villages bring conservation area and listed building controls.

What does a single-storey extension involve?

We design the extension around how you use the house: where the light comes from, how the new room joins the old one, and what happens to the drains and the garden. The structure is built in brick or block to match the house, finished with a flat roof and lantern or a pitched roof, then insulated, plastered and handed back ready to decorate.

Planning or lawful development certificate where needed
Foundations, drainage and structural steel
First-fix and second-fix electrics, plastering and making good

What is the guide price for a single-storey extension in Beaconsfield?

Use these ranges to budget for single-storey extensions; the survey turns them into a fixed price for the agreed specification.

Single-storey extensions	Guide price incl. VAT
Standard specification	£2,600 to £3,000 per m²
Good specification	£3,000 to £3,500 per m²
High specification	£3,500 to £4,000 per m²

Do you need permission for a single-storey extension in Beaconsfield?

In England we deal with the council’s planning team for permission or a lawful development certificate, with building control (the council or a registered building control approver) for inspections, and with neighbours under the Party Wall etc. Act 1996 where it applies.

In England a single-storey rear extension can often go ahead under permitted development: up to 3 m deep on an attached house or 4 m on a detached one, no higher than 4 m, with eaves no higher than 3 m within 2 m of a boundary. Deeper extensions, up to 6 m or 8 m, need prior approval from the council first.

What should Beaconsfield homeowners check first?

Drains under the footprint may need diverting or a build-over agreement with the water company.
Building on or near a shared boundary usually means serving a party wall notice in England and Wales.

What happens after I enquire?

Send us the details. Give us a postcode, a rough idea of size and some photos, by phone, form or the guide price tool.
We visit and measure. A surveyor checks the house, the boundaries and the ground, and discusses what is realistic.
Design and fixed price. You get drawings and a written price for the agreed specification before anything is ordered.
Construction and completion. One site lead co-ordinates every trade through to the building control certificate.

Questions about a single-storey extension in Beaconsfield

How much does a single-storey extension cost?

Most single-storey extensions cost about £2,600 to £4,000 per square metre including VAT, depending on specification, glazing and ground conditions. We give a fixed price in writing for the agreed specification after the survey.

Can we stay in the house during the build?

Usually yes. We keep the existing house closed off from the works until the knock-through near the end, and agree a temporary kitchen set-up with you if the kitchen is affected.

How do I get a price for single-storey extensions in Beaconsfield?

Use the guide price tool for a ballpark figure, then book a visit for a fixed written price for the agreed specification.

Other towns nearby

Learn more about single-storey extensions, or see every project we cover in Beaconsfield.