Single-storey extensions in Bridgwater

Covering Bridgwater

Alongside Bridgwater, we also cover Burnham-on-Sea, Taunton (9 miles to the south-west) and Weston-super-Mare.

Homes in the South West

Homes in the South West range from coastal and rural properties in stone and slate to city terraces and modern estates, so extensions are designed to match the local materials.

What is a single-storey extension?

We design the extension around how you use the house: where the light comes from, how the new room joins the old one, and what happens to the drains and the garden. The structure is built in brick or block to match the house, finished with a flat roof and lantern or a pitched roof, then insulated, plastered and handed back ready to decorate.

Building control application and inspections
Brickwork, roof, glazing and insulation
First-fix and second-fix electrics, plastering and making good

How much does a single-storey extension cost in Bridgwater?

Use these ranges to budget for single-storey extensions; the survey turns them into a fixed price for the agreed specification.

Single-storey extensions	Guide price incl. VAT
Standard specification	£2,600 to £3,000 per m²
Good specification	£3,000 to £3,500 per m²
High specification	£3,500 to £4,000 per m²

Planning and building rules in Bridgwater

Projects in England go through two separate checks. Planning (or confirmation that the work is permitted development) comes from the district, borough or unitary council, and building regulations approval comes from the council’s building control team or a registered building control approver. Where work touches a shared wall or digs near a neighbour’s foundations, the Party Wall etc. Act 1996 applies.

In England a single-storey rear extension can often go ahead under permitted development: up to 3 m deep on an attached house or 4 m on a detached one, no higher than 4 m, with eaves no higher than 3 m within 2 m of a boundary. Deeper extensions, up to 6 m or 8 m, need prior approval from the council first.

What should I think about before starting?

Drains under the footprint may need diverting or a build-over agreement with the water company.
Large glazed areas need to meet energy rules, which can shape the size of doors and rooflights.

What are the steps?

Start with a conversation. A short call or the online form is enough for us to understand what you want to build.
We visit and measure. A surveyor checks the house, the boundaries and the ground, and discusses what is realistic.
Design and fixed price. You get drawings and a written price for the agreed specification before anything is ordered.
Build and hand over. Our teams build to the programme, building control inspects, and you get the completion paperwork at the end.

Your questions answered

How much does a single-storey extension cost?

Most single-storey extensions cost about £2,600 to £4,000 per square metre including VAT, depending on specification, glazing and ground conditions. We give a fixed price in writing for the agreed specification after the survey.

Can we stay in the house during the build?

Usually yes. We keep the existing house closed off from the works until the knock-through near the end, and agree a temporary kitchen set-up with you if the kitchen is affected.

Who deals with the council for a project in Bridgwater?

We do. We prepare the drawings, submit planning or permitted development paperwork if needed, and arrange building control inspections.

Also covering

Learn more about single-storey extensions, or see every project we cover in Bridgwater.