Single-storey extensions in Perth

Covering Perth

Our coverage around Perth (PH1) also includes Auchterarder, Kinross and Blairgowrie.

Homes in Perth and Kinross

In Scotland many families extend bungalows and semis, while tenement flats bring shared ownership of roofs and walls that needs agreeing early.

What is included in a single-storey extension in Perth?

We design the extension around how you use the house: where the light comes from, how the new room joins the old one, and what happens to the drains and the garden. The structure is built in brick or block to match the house, finished with a flat roof and lantern or a pitched roof, then insulated, plastered and handed back ready to decorate.

Building warrant application and completion certificate
Foundations, drainage and structural steel
Brickwork, roof, glazing and insulation

How much does a single-storey extension cost in Perth?

Use these ranges to budget for single-storey extensions; the survey turns them into a fixed price for the agreed specification.

Single-storey extensions	Guide price incl. VAT
Standard specification	£2,600 to £3,000 per m²
Good specification	£3,000 to £3,500 per m²
High specification	£3,500 to £4,000 per m²

What approvals does a single-storey extension need in Scotland?

Projects in Scotland need a building warrant from the council before any building work starts, and a completion certificate once it is finished. Planning permission is a separate decision. The Party Wall etc. Act does not apply in Scotland; shared walls are governed by title deeds and the law of the tenement where relevant.

Scotland has its own householder permitted development rules, and small single-storey rear extensions are often covered. Whatever the planning position, you need a building warrant from the council before any building work starts, and a completion certificate at the end.

What can affect a single-storey extension?

Drains under the footprint may need diverting or a build-over agreement with the water company.
Kitchens and doors have long lead times, so we order them early.

What happens after I enquire?

Tell us about the project. Call, use the guide price tool or send the form with a few photos and a postcode.
Survey at your house. We look at the existing structure, services and access, and agree what the design needs to achieve.
Design and fixed price. You get drawings and a written price for the agreed specification before anything is ordered.
Construction and completion. One site lead co-ordinates every trade through to the building control certificate.

What people ask before starting

How much does a single-storey extension cost?

Most single-storey extensions cost about £2,600 to £4,000 per square metre including VAT, depending on specification, glazing and ground conditions. We give a fixed price in writing for the agreed specification after the survey.

Can we stay in the house during the build?

Usually yes. We keep the existing house closed off from the works until the knock-through near the end, and agree a temporary kitchen set-up with you if the kitchen is affected.

Can you visit a house in Perth to quote?

Yes. After a short call we arrange a site visit to measure up and agree what the design needs to do, then send a written price.

Other towns nearby

Learn more about single-storey extensions, or see every project we cover in Perth.