Single-storey extensions in Selby

Covering Selby

Our coverage around Selby (YO8) also includes Goole (10 miles to the south-east) and Pontefract.

Homes in Yorkshire and the Humber

Across Yorkshire and the Humber, older stone and brick terraces sit alongside inter-war semis and newer estates, and dormers and rear extensions are designed to suit each.

What goes into a single-storey extension?

We design the extension around how you use the house: where the light comes from, how the new room joins the old one, and what happens to the drains and the garden. The structure is built in brick or block to match the house, finished with a flat roof and lantern or a pitched roof, then insulated, plastered and handed back ready to decorate.

Measured survey and design drawings
Building control application and inspections
Brickwork, roof, glazing and insulation

How much should I budget for a single-storey extension?

Typical ranges for single-storey extensions. Ground conditions, access and specification move the final figure, which we fix in writing before work starts.

Single-storey extensions	Guide price incl. VAT
Standard specification	£2,600 to £3,000 per m²
Good specification	£3,000 to £3,500 per m²
High specification	£3,500 to £4,000 per m²

How is a single-storey extension approved in Selby?

In England we deal with the council’s planning team for permission or a lawful development certificate, with building control (the council or a registered building control approver) for inspections, and with neighbours under the Party Wall etc. Act 1996 where it applies.

In England a single-storey rear extension can often go ahead under permitted development: up to 3 m deep on an attached house or 4 m on a detached one, no higher than 4 m, with eaves no higher than 3 m within 2 m of a boundary.

What should I think about before starting?

Building on or near a shared boundary usually means serving a party wall notice in England and Wales.
Large glazed areas need to meet energy rules, which can shape the size of doors and rooflights.

What happens after I enquire?

Tell us about the project. Call, use the guide price tool or send the form with a few photos and a postcode.
We visit and measure. A surveyor checks the house, the boundaries and the ground, and discusses what is realistic.
Design and fixed price. You get drawings and a written price for the agreed specification before anything is ordered.
Build and hand over. Our teams build to the programme, building control inspects, and you get the completion paperwork at the end.

Single-storey extensions: common questions

How much does a single-storey extension cost?

Most single-storey extensions cost about £2,600 to £4,000 per square metre including VAT, depending on specification, glazing and ground conditions. We give a fixed price in writing for the agreed specification after the survey.

Do you need to dig up the drains?

Sometimes. If a public sewer runs under the extension, the water company has to agree a build-over or a diversion. We check this at survey stage.

How do I get a price for single-storey extensions in Selby?

Use the guide price tool for a ballpark figure, then book a visit for a fixed written price for the agreed specification.

Also covering

Learn more about single-storey extensions, or see every project we cover in Selby.