Wraparound extensions in Henley-on-Thames

Covering Henley-on-Thames

Henley-on-Thames is about 21 miles south-east of Oxford. We also cover Reading (6 miles to the south-west), Maidenhead and Wokingham.

Homes in the South East

Many South East homes are inter-war or post-war semis and detached houses with room for rear and side extensions, while historic town centres and villages bring conservation area and listed building controls.

What does a wraparound extension involve?

A wraparound extension combines a side return and a rear extension into one L-shaped build, giving the biggest possible ground-floor space on terraced and semi-detached houses. It usually creates a large open-plan kitchen, dining and living area across the back of the house.

Design, planning drawings and structural calculations
Pitched, flat or glazed roof with rooflights
Optional kitchen supply and installation

How much should I budget for a wraparound extension?

Use these ranges to budget for wraparound extensions; the survey turns them into a fixed price for the agreed specification.

Wraparound extensions	Guide price incl. VAT
Standard specification	£3,400 to £3,800 per m²
Good specification	£3,800 to £4,250 per m²
High specification	£4,250 to £4,700 per m²

How is a wraparound extension approved in Henley-on-Thames?

In England we deal with the council’s planning team for permission or a lawful development certificate, with building control (the council or a registered building control approver) for inspections, and with neighbours under the Party Wall etc. Act 1996 where it applies.

In England a wraparound extension is treated as one extension, and because it covers both the side and the rear it does not normally fit within permitted development. Most need householder planning permission, which usually takes around eight weeks once validated.

What should I think about before starting?

The corner steel connection is the critical detail and is designed by a structural engineer.
Both neighbours may need party wall notices.

How does the project run?

Tell us about the project. Call, use the guide price tool or send the form with a few photos and a postcode.
Free site visit. We measure up, look at access, drains and the structure, and talk through options and budget.
Design and fixed price. You get drawings and a written price for the agreed specification before anything is ordered.
We build it. Work follows an agreed programme, with inspections at each stage and a final sign-off.

Wraparound extensions: common questions

How much does a wraparound extension cost?

Typically £3,400 to £4,700 per square metre including VAT. Many come in between £85,000 and £120,000 before the kitchen.

Does a wraparound need planning permission?

Usually yes. In England it combines a side and rear extension, which takes it outside permitted development in most cases.

Can you visit a house in Henley-on-Thames to quote?

Yes. After a short call we arrange a site visit to measure up and agree what the design needs to do, then send a written price.

Wraparound extensions in nearby towns

Learn more about wraparound extensions, or see every project we cover in Henley-on-Thames.