Single-storey extensions in West Yorkshire

Covering West Yorkshire

We cover West Yorkshire, including Leeds, Bradford, Huddersfield and Wakefield, and the towns around them.

Homes in Yorkshire and the Humber

Yorkshire has a strong mix of stone terraces, red-brick semis and modern estates, plus conservation areas in many historic towns and villages.

What is a single-storey extension?

We design the extension around how you use the house: where the light comes from, how the new room joins the old one, and what happens to the drains and the garden. The structure is built in brick or block to match the house, finished with a flat roof and lantern or a pitched roof, then insulated, plastered and handed back ready to decorate.

Foundations, drainage and structural steel
Brickwork, roof, glazing and insulation
First-fix and second-fix electrics, plastering and making good

How much should I budget for a single-storey extension?

Indicative costs for single-storey extensions. London and the South East usually sit towards the top of each range.

Single-storey extensions	Guide price incl. VAT
Standard specification	£2,600 to £3,000 per m²
Good specification	£3,000 to £3,500 per m²
High specification	£3,500 to £4,000 per m²

Planning and building rules in West Yorkshire

Projects in England go through two separate checks. Planning (or confirmation that the work is permitted development) comes from the district, borough or unitary council, and building regulations approval comes from the council’s building control team or a registered building control approver. Where work touches a shared wall or digs near a neighbour’s foundations, the Party Wall etc. Act 1996 applies.

In England a single-storey rear extension can often go ahead under permitted development: up to 3 m deep on an attached house or 4 m on a detached one, no higher than 4 m, with eaves no higher than 3 m within 2 m of a boundary. Deeper extensions, up to 6 m or 8 m, need prior approval from the council first.

What should I think about before starting?

Drains under the footprint may need diverting or a build-over agreement with the water company.
Building on or near a shared boundary usually means serving a party wall notice in England and Wales.

What are the steps?

Tell us about the project. Call, use the guide price tool or send the form with a few photos and a postcode.
We visit and measure. A surveyor checks the house, the boundaries and the ground, and discusses what is realistic.
Price and paperwork. The design is priced line by line, and we submit the planning and building control applications.
We build it. Work follows an agreed programme, with inspections at each stage and a final sign-off.

Single-storey extensions: common questions

How much does a single-storey extension cost?

Most single-storey extensions cost about £2,600 to £4,000 per square metre including VAT, depending on specification, glazing and ground conditions. We give a fixed price in writing for the agreed specification after the survey.

Do you need to dig up the drains?

Sometimes. If a public sewer runs under the extension, the water company has to agree a build-over or a diversion. We check this at survey stage.

Do you work in West Yorkshire?

Yes. West Yorkshire is within our coverage for single-storey extensions, along with nearby Leeds and Bradford.

Also covering

Learn more about single-storey extensions, or see every project we cover in West Yorkshire.